Roller Blind

Plain Blockout Roller Blind

Plain Blockout Roller Blinds are a simple and effective window covering when room darkening and privacy is required. Raised and lowered by a chain as required or can be ordered motorised. Available in a variety of colours and made of 100% polyester with an easy wipe clean surface and in widths up to 3000mm wide. Plain Blockout Roller Blinds are a cost effective solution for all areas of the home, bach or office. All fabrics in this category are the same colour both sides. We have recently introduced Resene Bancoora to this range which is a Plain Blockout fabric that was designed in collaboration with Resene so you could choose a Roller Blind fabric to co-ordinate with Resene paint colours.

Click on the Double or Linked Blind icon below to transform the ordering page accordingly.

If you are ordering as an inside fit, please take note there will be standard light gaps down the sides and along the top of the window. If you would prefer more coverage, consider measuring and ordering the Plain Blockout Roller Blind to be fitted to the outside of the frame, either onto the architrave or on the wall above. If you do this, it is recommended you back roll the fabric, to keep it close to the frame. With outside fit we will provide end caps for the brackets.

Please note the width size you order for Roller Blinds is the bracket to bracket size, the fabric is 33mm less. Rollers require a 60mm recess for a flush fit inside the frame. You can still install Roller Blinds into narrower recesses but keep in mind bracket and tube will stick out.

All fabrics in this range are supplied by Uniline, the key difference between Sunset and Dawn is that Dawn has a mould and mildew resistant finish. You cannot see or feel a difference between them.

Order Now