Plain Blockout Roller Blinds
The Plain Blockout Roller is perfect for when you are after something very simple to pull down for privacy. The Plain Blockout Roller is operated by a chain to raise and lower the blind as required. Available in a variety of colours and made of 100% polyester with an acrylic coating on both sides to give an easy clean wipe down surface. Available in widths of up to 3000mm wide. The plain blockout blind is cost effective and suitable for all areas of the home. All fabrics in this range are the same colour both sides.
Plain Blockout Rollers can be measure to fit inside the frame or outside the frame. If you are ordering it for an inside fit, please take note there are standard light gaps down the side and along the top. Rollers require 70mm recess for a flush fit inside the frame. If you would prefer more coverage you could measure the Plain Blockout Roller to be fitted to the outside of the frame, either onto the architrave or above on the wall. If you do this it is recommended you back roll the fabric to keep it close to the frame. Please note the size you order for Roller Blinds is the bracket to bracket size, the fabric is 33mm less.