Honeycomb Blinds Installation

Installing your blinds is really easy with our simple installation guides!

ITEMS: TOOLS REQUIRED:

  1. Honeycomb Blind 1. Cordless drill
  2. Brackets and screws 2. Pencil

Cellular Blinds Installation Inside Fit

Step 1 Inside fit

Unwrap your Honeycomb blind.

Using a pencil mark 9cm and 12cm in from the inside edge of the frame. Repeat at the opposite edge. Place the brackets in the middle of the marks and screw into place. For blinds requiring more brackets space them evenly.

Step 2 Inside fit

When fitting the blind, leave the blind pulled up.

On the front of the head rail at the top there is a lip. Hook this lip over the front of the bracket then push the back of the head rail up into the bracket until you hear it click into place.

Step 3 Inside Fit

This is how it should look once completed.

Pull the cords toward the middle of the blind, this releases the cord lock allowing you to lower the blind.

Honeycomb Blinds Installation Outside Fit

Step 1 Outside fit

Unwrap your Honeycomb blind.

For face fix measure 85mm on for left hand bracket outside edge 85mm on both ends

Note: Pre-drill face fixed brackets (use 4mm drill bit)

For blinds requiring more brackets space them evenly

Step 2 Outside Fit

When fitting the blind, leave the blind pulled up.

On the front of the head rail at the top there is a lip. Hook this lip over the front of the bracket then push the back of the head rail up into the bracket until you hear it click into place.

Step 3 Outside Fit

This is how it should look once completed.

Pull the cords toward the middle of the blind, this releases the cord lock allowing you to lower the blind.