0 items
in your cart
Vision Blinds Installation
Installing your blinds is really easy with our simple installation guides!
ITEMS: TOOLS REQUIRED:
- Vision Blind 1. Cordless drill
- Brackets and screws
- Child safe and screws (optional)
VisionInstallation Inside fit
Step 1 Inside fit
 | Unwrap blind and peel tape off middle wrap. (Do not use sharp object as this may damage your blind). Position brackets inside recess half way back from the frames edge and use a battery drill to fix a bracket. |
Step 2 Inside fit
 | Place blind into brackets. Hook the front lip of the headrail over the front of the bracket and then push the back of the bracket up so it clicks into place. TIP: if blind is particularly large have someone help you lift and secure in place. |
Step 3 Inside fit
 | Child safes must be installed on the vision blinds. Place the chain through the loop then screw the child safe to the inside of the frame. Allow for some slack in the chain so you may still operate the blind easily. |
Vision Installation Outside fit
Step 1 Outside fit
  | Unwrap blind and peel tape off middle wrap. (Do not use sharp object as this may damage your blind). Position brackets at each end 100mm above the top of the frame. If additional brackets are provided space them evenly and screw into place. |
Step 2 Outside fit
 | Place blind into brackets. Hook the front lip of the headrail over the front of the bracket and then push the back of the headrail into the bracket until it clicks. TIP: if blind is particularly large have someone help you lift and secure in place. |
Step 3 Outside fit
  | Child safes must be installed on the vision blinds. Place the chain through the loop then screw the child safe onto the wall. Allow for some slack in the chain so you can still operate the blind easily. Fitted Vision. |
